Your search

Nanoparticles are of interest in many applications since their decreased size may give them properties that are very different from bulk material. Often nanoparticle properties such as size (diameter) and size distribution are evaluated using transmission electron microscopy (TEM). These parameters, size and size distribution, can be more easily obtained from digitized TEM images by mapping particle signal to black and background pixel to white in a process known as thresholding then performing an algorithm known as a particle analysis. The goal of this study was to compare the ability of several popular thresholding algorithms to segment TEM images. Performance of the thresholding algorithms was evaluated through qualitative and quantitative measures. Results show that the choice of a thresholding algorithm will strongly affect the results obtained from particle analysis. © 2007 Materials Research Society.

The purpose of this study was to compare the ability of several texture analysis parameters to differentiate textured samples from a smooth control on images obtained with an Atomic Force Microscope (AFM). Surface roughness plays a major role in the realm of material science, especially in integrated electronic devices. As these devices become smaller and smaller, new materials with better electrical properties are needed. New materials with smoother surface morphology have been found to have superior electrical properties than their rougher counterparts. Therefore, in many cases surface texture is indicative of the electrical properties that material will have. Physical vapor deposition techniques such as Jet Vapor Deposition and Molecular Beam Epitaxy are being utilized to synthesize these materials as they have been found to create pure and uniform thin layers. For the current study, growth parameters were varied to produce a spectrum of textured samples. The focus of this study was the image processing techniques associated with quantifying surface texture. As a result of the limited sample size, there was no attempt to draw conclusions about specimen processing methods. The samples were imaged using an AFM in tapping mode. In the process of collecting images, it was discovered that roughness data was much better depicted in the microscope's "height" mode as opposed to "equal area" mode. The AFM quantified the surface texture of each image by returning RMS roughness and the first order histogram statistics of mean roughness, standard deviation, skewness, and kurtosis. Color images from the AFM were then processed on an off line computer running NIH ImageJ with an image texture plug in. This plug in produced another set of first order statistics computed from each images' histogram as well as second order statistics computed from each images' cooccurrence matrix. The second order statistics, which were originally proposed by Haralick, include contrast, angular second moment, correlation, inverse difference moment, and entropy. These features were computed in the 0°, 45°, 90°, and 135° directions. The findings of this study propose that the best combination of quantitative texture parameters is standard deviation, 0° inverse difference moment, and 0° entropy, all of which are obtained from the NIH ImageJ texture plug in. © 2010 Copyright SPIE - The International Society for Optical Engineering.

There is an acute and well-documented need for image processing of microscopy data in materials science regarding, for example, the characterization of the structure/property relationship of a given materials system. In our work, image processing has been used as a framework for conducting interdisciplinary team-based research that effectively integrates programs within the Center for Research on Interface Structures and Phenomena (CRISP) Materials Research Science and Engineering Center (MRSEC), e.g. research experiences for undergraduates (REU), teachers (RET) and high school fellowships. This research resulted from a five-year long collaboration between CRISP and the Physics and Computer Science Departments at Southern Connecticut State University (SCSU). This paper will focus on the implementation of team-based research experiences as a vehicle for interdisciplinary science and education. Representative results of several of the studies are presented and discussed. © 2011 Materials Research Society.

The interface formation mechanism during the molecular-beam epitaxy (MBE) of InAs/GaP has been studied with the aid of the In-Ga-P phase diagram. It is discovered that an initial dissolution and crystallization process similar to liquid phase epitaxy (LPE) may happen at sufficiently high temperature, resulting in a graded composition at the interface. Consequently, "parasitic LPE/MBE" is the name for this hybrid form of MBE. High-resolution TEM images confirm the existence of the interfacial layer in the sample grown at high temperature. The graded interface smears out the band offset and leads to a nonrectifying heterojunction. Low-temperature (LT) MBE growth can turn off the LPE component, enabling the growth of an abrupt interface. Based on this "LPE/MBE" model, a LT MBE technique is developed to grow an abrupt InAs/InGaP interface for heterojunction power Schottky rectifiers. The LT InAs/InGaP heterojunction demonstrates nearly ideal Schottky rectifier characteristics, while the sample grown at high temperature shows resistive ohmic characteristics. The LT InAs/InGaP Schottky diode also demonstrates good stability with respect to anneal temperature, similar to the InAs/GaP heterojunctions. © 2004 American Institute of Physics.

Ordered carbon nanotube (CNT) growth by deposition of nanoparticle catalysts using dip pen nanolithography (DPN) is presented. DPN is a direct write, tip based lithography technique capable of multi-component deposition of a wide range of materials with nanometer precision. A Nanolnk NLP 2000 is used to pattern different catalytic nanoparticle solutions on various substrates. To generate a uniform pattern of nanoparticle clusters, various conditions need to be considered. These parameters include: the humidity in the vessel, temperature, and tip-surface dwell time. By patterning different nanoparticle solutions next to each other, identical growth conditions can be compared for different catalysts in a streamlined analysis process. Fe, Ni, and Co nanoparticle solutions patterned on silicon, mica, and graphite substrates serve as nucleation sites for CNT growth. The CNTs were synthesized by a chemical vapor deposition (CVD) reaction. Each nanoparticle patterned substrate is placed in a tube furnace held at 725°C during CNT growth. The carbon source used in the growth chamber is toluene. The toluene is injected at a rate of 5 mL/hr. Growth is observed for Fe and Ni nanoparticle patterns, but is lacking for the Co patterns. The results of these reactions provide important information regarding efficient and highly reproducible mechanisms for CNT growth. © 2015 Materials Research Society.

This project was initiated with an undergraduate student's exploration of two advanced research tools: the scanning electron microscope (SEM) and the atomic force microscope (AFM). A research project was developed to study the application of microscopy to introductory physics instruction, Nine modules covering various aspects of introductory physics were created. Module components included discussions, laboratory experiments and assessments. Four of the nine modules were implemented in various high school classes. Assessments were used to compare student learning with the modules versus standard textbook/lecture techniques, Preliminary results of this study are presented along with recently developed methods created to facilitate implementation of these modules within the high school classroom. © 2006 Materials Research Society.

Across the planet, winter de-icing practices have caused secondary salinization of freshwater habitats. Many amphibians are vulnerable because of permeable skin and reliance on small ponds, where salinity can be high. Early developmental stages of amphibians are especially sensitive to salt, and larvae developing in salt-polluted environments must osmoregulate through ion exchange in gills. Though ionoregulation in amphibian gills is generally understood, the role of gill morphology remains poorly described. Yet gill structure should affect ionoregulatory capacity, for instance in terms of available surface area. As larval amphibian gills also play critical roles in gas exchange and foraging, changes in gill morphology from salt pollution potentially affect not only osmoregulation, but also respiration and feeding. Here, we used an exposure experiment to quantify salinity effects on larval gill morphology in wood frogs (Rana sylvatica). We measured a suite of morphological traits on gill tufts—where ionoregulation and gas exchange occur—and on gill filters used in feeding. Larvae raised in elevated salinity developed larger gill tufts but with lower surface area to volume ratio. Epithelial cells on these tufts were less circular but occurred at higher densities. Gill filters showed increased spacing, likely reducing feeding efficiency. Many morphological gill traits responded quadratically, suggesting that salinity might induce plasticity in gills at intermediate concentrations until energetic demands exceed plasticity. Together, these changes likely diminish ionoregulatory and respiratory functionality of gill tufts, and compromise feeding functionality of gill filters. Thus, a singular change in aquatic environment from a widespread pollutant appears to generate a suite of consequences via changes in gill morphology. Critically, these changes in traits likely compound the severity of fitness impacts in populations dwelling in salinized environments, whereby ionoregulatory energetic demands should increase respiratory and foraging demands, but in individuals who possess structures poorly adapted for these functions. © 2021 Elsevier Ltd

A method has been developed to use the finite escape depth of the photoelectrons emitted in ultraviolet photoemission spectroscopy (UPS) to determine the electronic density-of-states at the interface between two dissimilar metal oxides. Ultrathin films of one oxide are grown heteroepitaxially, one monolayer at a time, on a single-crystal substrate of the other oxide, and UPS spectra are taken after each complete monolayer. By comparing experimental UPS spectra with calculated spectra based on specific models of the interfacial structure, the interfacial density-of-states can be extracted. The two oxide systems studied here are NiO-Fe 3O 4 and CoO-Fe 3O 4. The former system is found to have an atomically abrupt interface, with no significant density of interface states. For CoO, however, an interfacial electronic spectrum, different from that of either the substrate or the overlayer, is found. The spatial extent and possible origin of those interfacial states is discussed. © 2010 WILEY-VCH Verlag GmbH &. Co. KGaA, Weinheim.

Adoption of Materials Science and Engineering (MSE) into the pre-college classroom is an ideal strategy for addressing Next Generation Science Standards (NGSS), specifically the Science and Engineering Practices. MSE offers core science and engineering topics that can be incorporated into existing Science, Technology, Engineering, and Mathematic (STEM) curricula through teaching modules. Using MSE as a teaching vehicle, the Center for Research on Interface Structures and Phenomena (CRISP) conducted a series of small-scale studies of its teacher professional development workshops and a student summer program, along with related teaching modules, in an effort to measure the contribution MSE has on students and K-12 STEM educators. Based on participant survey feedback, CRISP found improvement in students' MSE knowledge, interests, and career goals. For teachers, in addition to improving their MSE knowledge, they also increased their comfort and confidence in teaching MSE concepts in their classroom. These results provide evidence for the use of MSE modules as productive teaching tools for NGSS Science and Engineering Practices, as well as producing workforce-competitive STEM students. Copyright © Materials Research Society 2017.

Research Experiences for Undergraduates (REU) programs traditionally function as a recruitment vehicle to encourage students to pursue further studies in STEM (Science, Technology, Engineering and Math) and as an opportunity for STEM majors to delve deeper into their chosen fields of study. Based on a critical examination of REU student feedback, evaluators at CRISP (Center for Research on Interface Structures and Phenomena) have found that in addition to these conventional benefits of research-based experiences, the value of interdisciplinary skill development is integral to the REU experience and these contributions may warrant a more formal evaluative definition. Using the emerging 21st Century Skills Framework, CRISP has begun conducting a series of small-scale studies in an effort to define the contribution of student research experiences in cross-disciplinary skill development and the positive effects that exposure to real-world science practices have on refinement of career decisions and vocational success. Using Likert-type survey methods, this study directly examines current and former REU students' perceptions of the importance of interdisciplinary 21st century skills such as creativity, collaboration, communication, information literacy, and problem-solving in their REU experience and their perceived value of these skills in their future and/or current careers. Through better understanding the role these "soft skills" play in student research experiences, CRISP hopes to maximize these interdisciplinary benefits within its REU program to best prepare students for the complex demands of the 21st century workplace. © 2015 Materials Research Society.

The intent of the CRISP education and outreach effort is to use materials science as a vehicle for enhancing the scientific literacy and knowledge of kindergarten through postgraduate level students. A challenging part of our mission has been inspiring students to take the next step and consider further study (or a career) in the field of Materials Science and Engineering (MSE). The CRISP educational programs were developed through a partnership between Yale University, Southern Connecticut State University and the urban school district of New Haven, CT. An overview of the methods and results of both formal and informal educational program components is included for years one and two of the CRISP MRSEC. This paper will focus on two CRISP programs: 1) MRSEC Initiative for Multidisciplinary Education & Research (MIMER) and 2) "Exploring Materials Science" mobile kits. The evaluation data indicates that the approach used in developing these educational programs is important. Specifically, the impact of these programs is influenced by the students' ability to relate the acquired knowledge to real life applications and technologies. In particular, emphasizing career opportunities rather than just presenting content-based programs is a key element to increasing interest towards further study in Materials Science and Engineering. © 2008 Materials Research Society.

We report sol-gel process of Pb5Ge3O11 (PGO) as well as the microstructure and physical properties of ferroelectric PGO films for memory applications. The PGO sol was prepared from lead acetate hydrate, germanium isopropoxide, and di(ethylene glycol) ethyl ether. The reactions taking place during the sol-gel process were examined in detail, Diethanolamine (DEA) was added to help maintain the desired species ratio and prevent germanium oxide precipitation. The preferred orientation of the PGO thin films was well controlled by the heating and reflux procedures in the sol-gel preparation process. Additionally, to examine the impact of post-deposition processing, selected samples were oxygen annealed at temperatures ranging from 450-650°C. The samples were characterized with X-ray diffraction (XRD), non-contact (planview) atomic force microscopy (NC-AFM). The resulting data indicate that the microstructure and physical properties of PGO films depend strongly on the precursor preparation as well as the post deposition annealing temperature.

The green, sustainable, and inexpensive creation of novel materials, primarily nanoparticles, with effective energy-storing properties, is key to addressing both the rising demand for energy storage and the mounting environmental concerns throughout the world. Here, an orange peel extract is used to make cobalt oxide nanoparticles from cobalt nitrate hexahydrate. The orange peel extract has Citrus reticulata, which is a key biological component that acts as a ligand and a reducing agent during the formation of nanoparticles. Additionally, the same nanoparticles were also obtained from various precursors for phase and electrochemical behavior comparisons. The prepared Co-nanoparticles were also sulfurized and phosphorized to enhance the electrochemical properties. The synthesized samples were characterized using scanning electron microscopic and X-ray diffraction techniques. The cobalt oxide nanoparticle showed a specific capacitance of 90 F/g at 1 A/g, whereas the cobalt sulfide and phosphide samples delivered an improved specific capacitance of 98 F/g and 185 F/g at 1 A/g. The phosphide-based nanoparticles offer more than 85% capacitance retention after 5000 cycles. This study offers a green strategy to prepare nanostructured materials for energy applications.

Two dimensional electron gases (2DEGs) formed at the interfaces of oxide heterostructures draw considerable interest owing to their unique physics and potential applications. Growing such heterostructures on conventional semiconductors has the potential to integrate their functionality with semiconductor device technology. We demonstrate 2DEGs on a conventional semiconductor by growing GdTiO3-SrTiO3 on silicon. Structural analysis confirms the epitaxial growth of heterostructures with abrupt interfaces and a high degree of crystallinity. Transport measurements show the conduction to be an interface effect, ∼9 × 1013 cm-2 electrons per interface. Good agreement is demonstrated between the electronic behavior of structures grown on Si and on an oxide substrate, validating the robustness of this approach to bridge between lab-scale samples to a scalable, technologically relevant materials system. © 2015 AIP Publishing LLC.

We present the growth and characterization of layered heterostructures comprised of LaTiO3 and SrTiO3 epitaxially grown on Si (001). Magnetotransport measurements show that the sheet carrier densities of the heterostructures scale with the number of LaTiO3/SrTiO3 interfaces, consistent with the presence of an interfacial 2-dimensional electron gas (2DEG) at each interface. Sheet carrier densities of 8.9 × 1014 cm-2 per interface are observed. Integration of such high density oxide 2DEGs on silicon provides a bridge between the exceptional properties and functionalities of oxide 2DEGs and microelectronic technologies. © 2014 Author(s).

The exploration of new alloys with desirable properties has been a long-standing challenge in materials science because of the complex relationship between composition and microstructure. In this Research Article, we demonstrate a combinatorial strategy for the exploration of composition dependence of microstructure. This strategy is comprised of alloy library synthesis followed by high-throughput microstructure characterization. As an example, we synthesized a ternary Au-Cu-Si composition library containing over 1000 individual alloys using combinatorial sputtering. We subsequently melted and resolidified the entire library at controlled cooling rates. We used scanning optical microscopy and X-ray diffraction mapping to explore trends in phase formation and microstructural length scale with composition across the library. The integration of combinatorial synthesis with parallelizable analysis methods provides a efficient method for examining vast compositional ranges. The availability of microstructures from this vast composition space not only facilitates design of new alloys by controlling effects of composition on phase selection, phase sequence, length scale, and overall morphology, but also will be instrumental in understanding the complex process of microstructure formation in alloys.