Your search

Two dimensional electron gases (2DEGs) formed at the interfaces of oxide heterostructures draw considerable interest owing to their unique physics and potential applications. Growing such heterostructures on conventional semiconductors has the potential to integrate their functionality with semiconductor device technology. We demonstrate 2DEGs on a conventional semiconductor by growing GdTiO3-SrTiO3 on silicon. Structural analysis confirms the epitaxial growth of heterostructures with abrupt interfaces and a high degree of crystallinity. Transport measurements show the conduction to be an interface effect, ∼9 × 1013 cm-2 electrons per interface. Good agreement is demonstrated between the electronic behavior of structures grown on Si and on an oxide substrate, validating the robustness of this approach to bridge between lab-scale samples to a scalable, technologically relevant materials system. © 2015 AIP Publishing LLC.

We present the growth and characterization of layered heterostructures comprised of LaTiO3 and SrTiO3 epitaxially grown on Si (001). Magnetotransport measurements show that the sheet carrier densities of the heterostructures scale with the number of LaTiO3/SrTiO3 interfaces, consistent with the presence of an interfacial 2-dimensional electron gas (2DEG) at each interface. Sheet carrier densities of 8.9 × 1014 cm-2 per interface are observed. Integration of such high density oxide 2DEGs on silicon provides a bridge between the exceptional properties and functionalities of oxide 2DEGs and microelectronic technologies. © 2014 Author(s).

The exploration of new alloys with desirable properties has been a long-standing challenge in materials science because of the complex relationship between composition and microstructure. In this Research Article, we demonstrate a combinatorial strategy for the exploration of composition dependence of microstructure. This strategy is comprised of alloy library synthesis followed by high-throughput microstructure characterization. As an example, we synthesized a ternary Au-Cu-Si composition library containing over 1000 individual alloys using combinatorial sputtering. We subsequently melted and resolidified the entire library at controlled cooling rates. We used scanning optical microscopy and X-ray diffraction mapping to explore trends in phase formation and microstructural length scale with composition across the library. The integration of combinatorial synthesis with parallelizable analysis methods provides a efficient method for examining vast compositional ranges. The availability of microstructures from this vast composition space not only facilitates design of new alloys by controlling effects of composition on phase selection, phase sequence, length scale, and overall morphology, but also will be instrumental in understanding the complex process of microstructure formation in alloys.

Composites of MnO2/multi-wall carbon nanotubes (MWCNTs) were prepared using different weight ratios of MWCNTs: KMnO4 (1:2, 1:5, 1:10, 1:15, 1:20, and 1:25) using a one-pot hydrothermal method. The synthesized materials were physically characterized by x-ray diffraction, transmission electron microscopy (TEM), field emission-scanning electron microscopy (FE-SEM), (Brunauer–Emmett–Teller) BET, and thermogravimetric analysis. TEM and SEM studies indicate that MnO2 is homogeneously entangled with MWCNTs. The electrochemical performance evaluation was performed in a 3-electrode system using MnO2/MWCNT electrodes coated onto a Ni mesh as the working electrode, a Pt foil as the counter electrode, and Ag/AgCl as the reference electrode. The specific capacitance was obtained from charge–discharge studies at varying current densities between 0.5 and 5 A/g. The specific capacitance of MWCNT-KMnO4 (1:10, 1:15, and 1:25) samples was obtained as 114, 164, and 100 F/g, respectively, at a current density of 1 A/g.

As novel theories and uses of carbon nanotubes (CNT) advance, it becomes increasingly important to characterize the methods of production. One such method of CNT production uses a liquid phase precursor (hydrocarbon with nanoparticle catalyst mix) that is injected into a tube furnace with a flowing carrier gas. The CNTs are grown in high purity and are collected on the surface of the quartz tube. The system allows for a number of variables to be tested such as growth temperatures, flow rate of the carrier gas, precursor injection rates and variations of precursor mix however, here only thermal effects are considered. Under thermal conditions ranging from 500 to 850°C, multi-walled carbon nanotubes (MWCNTs) are synthesized and characterized to determine inner and outer diameter as well as tube thickness. © 2014 World Scientific Publishing Company.

Bulk metallic glasses synthesized at specialized facilities at Yale using magnetron cosputtering are sent to Southern Connecticut State University for elemental characterization. Characterization is done using a Zeiss Sigma VP SEM coupled with an Oxford EDS. Characterization is automated using control software provided by Oxford. Collected data is processed and visualized using computational methods developed internally. Processed data is then organized into a database suitable for web retrieval. This technique allows for the rapid characterization of a combinatorial wafer to be carried out in ~11 hours for a single wafer containing ~600 unique compounds. © 2015 World Scientific Publishing Company.

Combinatorial approaches comprised of combinatorial magnetron co-sputtering deposition and fast screening methods are introduced to study color as a function of composition in Au-based alloys. The microstructures of the thin films and bulk alloys are identified by X-ray diffraction, and their colors of the alloys are characterized by optical reflectivity. The results reveal that when comparing microstructures and reflectivity, thin films are similar to bulk alloys. In Au-Ag-Cu solid solutions, the color of the ternary alloy follows the rule of mixture. For colors resulting from AuAl2 intermetallic, the color of an alloy scales with the percentage of the intermetallic phase and the deviation from its ideal binary composition. In the Au-Al-Cu library, we found a ∼90 % AuAl2 area fraction compositional window where copper addition can be tuned to improve mechanical properties while keeping purple color, even though Al and CuAl2 phases exist. Moreover, when comparing the color in Au-Cu-Si-Ag amorphous and crystalline state solid solution for the same composition, the colors are essentially identical. © 2015 The Author(s).

Nanoparticles, particles with a diameter of 1-100 nanometers (nm), are of interest in many applications including device fabrication, quantum computing, and sensing because their size may give them properties that are very different from bulk materials. Further advancement of nanotechnology cannot be obtained without an increased understanding of nanoparticle properties such as size (diameter) and size distribution frequently evaluated using transmission electron microscopy (TEM). In the past, these parameters have been obtained from digitized TEM images by manually measuring and counting many of these nanoparticles, a task that is highly subjective and labor intensive. More recently, computer imaging particle analysis has emerged as an objective alternative by counting and measuring objects in a binary image. This paper will describe the procedures used to preprocess a set of gray scale TEM images so that they could be correctly thresholded into binary images. This allows for a more accurate assessment of the size and frequency (size distribution) of nanoparticles. Several preprocessing methods including pseudo flat field correction and rolling ball background correction were investigated with the rolling ball algorithm yielding the best results. Examples of particle analysis will be presented for different types of materials and different magnifications. In addition, a method based on the results of particle analysis for identifying and removing small noise particles will be discussed. This filtering technique is based on identifying the location of small particles in the binary image and removing them without affecting the size of other larger particles.

Thresholding is an image processing procedure used to convert an image consisting of gray level pixels into a black and white binary image. One application of thresholding is particle analysis. Once foreground objects are separated from the background, a quantitative analysis that characterizes the number, size and shape of particles is obtained which can then be used to evaluate a series of nanoparticle samples. Numerous thresholding techniques exist differing primarily in how they deal with variations in noise, illumination and contrast. In this paper, several popular thresholding algorithms are qualitatively and quantitatively evaluated on transmission electron microscopy (TEM) and atomic force microscopy (AFM) images. Initially, six thresholding algorithms were investigated: Otsu, Riddler-Calvard, Kittler, Entropy, Tsai and Maximum Likelihood. The Riddler-Calvard algorithm was not included in the quantitative analysis because it did not produce acceptable qualitative results for the images in the series. Two quantitative measures were used to evaluate these algorithms. One is based on comparing object area the other on diameter before and after thresholding. For AFM images the Kittler algorithm yielded the best results followed by the Entropy and Maximum Likelihood techniques. The Tsai algorithm yielded the top results for TEM images followed by the Entropy and Kittler methods.

This paper reports the microstructure and physical properties of ferroelectric capacitors formed from SrBi2Ta2O9 (SBT) layers on Si with various buffer layers including jet-vapor deposited silicon nitride, zirconium oxide, hafnium oxide and thermally grown silicon oxide. Results from cross-sectional transmission electron microscopy (X-TEM), energy dispersive spectroscopy (EDS), X-Ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and non-contact atomic force microscopy (nc-AFM) data coupled with capacitance-voltage (C-V) and current-voltage (I-V) data indicate that both the microstructure and physical properties of SBT films deposited on silicon are dependent on the buffer layer material employed.

A series of noble metal high entropy alloys with up to six constituent elements has been produced by casting. PtPdRhIrCuNi forms single-phase face-centered cubic solid solution, and its stability is confirmed by annealing experiments. This alloy deforms homogeneously to ~30% to a high ultimate compression strength of 1839MPa. We discuss rules for the formation of single-phase solid solution.

The Center for Research on Interface Structures and Phenomena (CRISP) is a National Science Foundation (NSF) Materials Research Science and Engineering Center (MRSEC). CRISP is a partnership between Yale University, Southern Connecticut State University (SCSU) and Brookhaven National Laboratory. A main focus of CRISP research is complex oxide interfaces that are prepared using epitaxial techniques, including molecular beam epitaxy (MBE). Complex oxides exhibit a wealth of electronic, magnetic and chemical behaviors, and the surfaces and interfaces of complex oxides can have properties that differ substantially from those of the corresponding bulk materials. CRISP employs this research program in a concerted way to educate students at all levels. CRISP has constructed a robust MBE apparatus specifically designed for safe and productive use by undergraduates. Students can grow their own samples and then characterize them with facilities at both Yale and SCSU, providing a complete research and educational experience. This paper will focus on the implementation of the CRISP Teaching MBE facility and its use in the study of the synthesis and properties of the crystalline oxide-silicon interface. C 2010 Materials Research Society.

Supercapacitors are considered some of the best electrochemical energy storage systems due to their high power and energy density, fast charge–discharge capabilities, and longer cycleability, compared to regular capacitors. In this paper, we report the synthesis of hybrid MnO2/CuS/reduced graphene oxide (MC-rGO) materials via a simple chemical route and characterized them to examine different properties. The focus of this article is to examine the effect of binder concentrations on the electrochemical properties of the supercapacitor electrodes, prepared using the synthesized hybrid materials. We used 5%, 10%, and 15% (wt.%) polyvinylidene fluoride (PVDF) binders to prepare the electrodes. We prepared the slurry of MC-rGO material using synthesized cathode materials, carbon black, and PVDF in 75:10:15, 80:10:10, and 85:10:5 wt.%. The specific capacitance with 5%, 10%, and 15% binders was found to be 176.33 F/g, 161.34 F/g, and 149.55 F/g, respectively, at 0.5 A/g current density. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2025.

Valence electron energy-loss spectroscopy is used to investigate the plasmon excitations of ultrathin SrTiO3 sandwiched between amorphous Si and crystalline Si. Two plasmon excitations were observed, one at 15.8 eV and the other at 28.7 eV. Our calculations, based on dielectric-function theory, suggest that the former peak originates from the coupling of the Si layers and is related to the geometry of the structure, and the latter peak results from the SrTiO3 bulk plasmon after a redshift. Our findings demonstrate the value of valence electron energy-loss spectroscopy in detecting a local change in the effective electron mass. © 2010 American Institute of Physics.

We describe a transmission-electron-microscopy study of the ferroelectric domains in an epitaxial Pb(Zr0.2Ti0.8)O3 (PZT) film grown on La0.7Sr0.3MnO3/SrTiO 3(001). We directly observe the pinning of 90 domain walls by pairs of misfit dislocations, respectively, with Burgers vectors a [100] and a [001]. Model calculations based on the elastic theory confirm our finding that, in addition to the depolarization field surrounding the dislocation, the strain field of misfit dislocation-pairs plays the primary role in the formation and pinning of a domains. © 2011 American Institute of Physics.

The glass forming ability (GFA) of metallic glasses (MGs) is quantified by the critical cooling rate (R C). Despite its key role in MG research, experimental challenges have limited measured R C to a minute fraction of known glass formers. We present a combinatorial approach to directly measure R C for large compositional ranges. This is realized through the use of compositionally-graded alloy libraries, which were photo-thermally heated by scanning laser spike annealing of an absorbing layer, then melted and cooled at various rates. Coupled with X-ray diffraction mapping, GFA is determined from direct R C measurements. We exemplify this technique for the Au-Cu-Si system, where we identify Au56Cu27Si17 as the alloy with the highest GFA. In general, this method enables measurements of R C over large compositional areas, which is powerful for materials discovery and, when correlating with chemistry and other properties, for a deeper understanding of MG formation.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has not been fixed in the paper.

Supercapacitors or electrochemical capacitors are receiving greater interest because of their high-power density, long life, and low maintenance. We have synthesized CuS nanoparticles and graphene oxide (CuS-GO) nanocomposites for supercapacitor applications because of their low cost and excellent electrochemical properties. The phase purity of each material was determined using powder XRD studies. The bandgap was determined by UV-visible spectrophotometric studies. Scanning electron microscope and transmission electron microscope images revealed the nano-scale morphology of the synthesized particles. All the electrochemical measurements were conducted in a standard three-electrode configuration, using a platinum wire as the counter electrode and Hg/HgO as the reference electrode. CuS and its composites with graphene oxide on nickel foam were used as working electrodes. All the electrochemical measurements were performed in 3M KOH solution. The CuS-GO nanocomposite electrode showed a specific capacitance of 250 F/g, 225 F/g, 182 F/g, 166 F/g, 161 F/g, and 158 F/g at a current density of 0.5 A/g, 1 A/g, 5 A/g, 10 A/g, 15 A/g, and 20 A/g, respectively. CuS-GO electrodes showed a specific capacitance retention of 70% after 5000 charge-discharge cycles at a current density of 5 A/g. © 2020 Author(s).

Applications of nanoscience in the non-traditional classroom have successfully exposed students to various methods of research with applications to micro- and nano-electronics. Activities obtained from the NanoSense website associated with current global energy and water concerns are solid examples 1. In this regard, all 36 students in the 2008-2009 Science Research Program (SRP) prepared and delivered individual and group lesson plans in addition to their authentic, year-long research projects. Two out of 36 students selected nanoscience based projects in preparation for science fair competition in 2009. Additionally, preliminary research was conducted while participating in the Center for Research on Interface Structures and Phenomena (CRISP) Research Experience for Teachers (RET) Program in summer 2008 which supported the idea of developing a photolithography kit. This kit is intended to introduce high school students to the fundamentals of photolithography. In this paper, the design, implementation and feasibility of this kit in the high school classroom is described as well as details involving individual and group nanoscience based projects. Supporting educational models include self-regulated learning (SRL) concepts: situated cognition; social constructivism; Renzulli's (1977) enrichment triad and Types I - III inquiry enrichment activities 2,3. © 2009 Materials Research Society.