Your search

Intensity interferometry, which was first used for obtaining ultra-high-resolution image information in astronomy in the 1960's and 1970's, is now being revived using modern detectors and electronics. This paper explores the possibility of wireless optical interferometry made possible by technological advancements in timing correlation, signal processing, and detector technology. If this can be achieved, then baselines of one to several kilometers may be possible in optical interferometry in the coming years. This would improve the resolution over the current generation of amplitude-based optical interferometers by a factor of at least ten. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. © 2015 SPIE.

In recent years, speckle imaging has proven very useful for certain problems in single-Aperture high-resolution imaging, including searching for faint stellar companions near exoplanet host stars and for satellite imaging. These developments have largely been the result of the availability of electron-multiplying CCD cameras, which allow for greater sensitivity and better photometric linearity when compared with other detectors that have comparable speed. This in turn has led to an increased use for speckle imaging at mid-sized and large telescopes. Some results of these efforts will be discussed, and the outlook for the future of speckle will be given. © 2016 SPIE.

Intensity interferometry, also known as the Hanbury Brown and Twiss effect, has seen significant interest in astronomy in recent years. The method involves recording timing correlations between photons received at two or more telescopes in order to derive extremely high spatial resolution information about an astronomical object, potentially including imaging stellar surfaces and other objects at unprecedented scales. This paper will briefly review the technique, discuss the performance characteristics of the of photon counters used in modern intensity interferometers, and describe opportunities for the future. As an example of photon counting with a working instrument, observing experiences with the Southern Connecticut Stellar Interferometer (SCSI), a three-station instrument using single-photon avalanche diode (SPAD) detectors, will be described. The recent lessons learned with this and other instruments in use today give a clear picture of the next steps needed to upgrade efficiency and successfully observe fainter objects. If successful, these improvements would provide a strong argument for creating situations where intensity interferometers can have baselines of one to several kilometers, which would unlock the spatial detail needed to address several exciting astrophysical questions.

The Southern Connecticut Stellar Interferometer is an astronomical intensity interferometer consisting of two telescopes. Each is currently equipped with a single-photon avalanche diode (SPAD) detector, and an ultra-fast timing module correlates counts between both photon detectors. The interferometer has previously demonstrated intensity correlations using the 1-pixel SPADs and extremely narrow band pass filters but was limited in the amount of light that could be collected, and therefore the signal-to-noise ratio that could be achieved. SCSU's recent acquisition of an 8-pixel SPAD detector has allowed for a new possibility: a different wavelength of light could be directed towards each of the 8 pixels of the detector, thus conducting 8 independent intensity interferometry experiments at the same time, if this could be implemented at both telescopes. Using materials and resources available in the Astronomical Instrumentation Laboratory at Southern Connecticut State University, an optical system has been developed to work toward this goal but outfitting the first telescope in this way. The light from the telescope is collimated and directed toward a reflective diffraction grating. This is then re-imaged using a second lens and directed onto the pixels of the photon detector. These optical components have been placed inside an aluminum housing and can be mounted to the telescope for test observations. A status report will be given on the observations so far. If this can be replicated at the other telescope, the signal-to-noise ratio achievable with the instrument could be improved by a factor of 2.8.

Statistical characterization of secondary subsystems in binaries helps to distinguish between various scenarios of multiple-star formation. The Differential Speckle Survey Instrument was used at the Gemini-N telescope for several hours in 2015 July to probe the binarity of 25 secondary components in nearby solar-type binaries. Six new subsystems were resolved, with meaningful detection limits for the remaining targets. The large incidence of secondary subsystems agrees with other similar studies. The newly resolved subsystem HIP 115417 Ba,Bb causes deviations in the observed motion of the outer binary from which an astrometric orbit of Ba,Bb with a period of 117 years is deduced. © 2016. The American Astronomical Society. All rights reserved.

The high-spatial-resolution technique of speckle interferometry has been in use at Lowell Observatory's Discovery Channel Telescope since 2014 with the Dual-channel Stellar Speckle Imager (DSSI; Horch et al. 2009) as a visiting instrument. Using its standard bandpasses of 692 and 880nm, we have used highly efficient DSSI instrument to inspect over a thousand stellar systems over the course of 2014 (Horch et al. 2015). We have also demonstrated the usefulness of the DSSI@DCT system for resolved observations of high-altitude (>1,000 miles) man-made satellites in highly non-sidereal rate orbits.

Recent work with the NESSI speckle camera at Kitt Peak and the 'Alopeke speckle camera at Gemini-North indicates that speckle data reduction techniques can be successfully modified to produce high-resolution images over fields that are at least tens of arc seconds across. While these wide-field speckle image reconstructions are not diffraction-limited, the improvement in resolution over the seeing-limited case can be substantial. In this paper, we explore the application of these techniques to data taken with a small (0.6-m) telescope in an urban environment. Many telescopes located in urban communities, such as New Haven, Connecticut, where Southern Connecticut State University resides, have limited use scientifically due to substantial light pollution, poor seeing, poor telescope tracking, and other issues. We will present initial data using our set-up and discuss the potential for this approach for improving the imaging capabilities of small telescopes on our campus and beyond.

A limitation of the current generation of long baseline optical interferometers is the need to make the light interfere prior to detection. This is unlike the radio regime where signals can be recorded fast enough to use electronics to accomplish the same result. This paper describes a modern optical intensity interferometer based on electronics with picosecond timing resolution. The instrument will allow for portable optical interferometry with much larger baselines than currently possible by using existing large telescopes. With modern electronics, the limiting magnitude of the technique at a 4-m aperture size becomes competitive with some amplitude-based interferometers. The instrumentation will permit a wireless mode of operation with GPS clocking technology, extending the work to extremely large baselines. We discuss the basic observing strategy, a planned observational program at the Lowell Observatory 1.8-m and 1.0-m telescopes, and the science that can realistically be done with this instrumentation. © 2012 SPIE.

The Differential Speckle Survey Instrument (DSSI) has been successfully operating at the ARC 3.5-m telescope at Apache Point Observatory in New Mexico for over a year, providing diffraction-limited imaging in the optical. We report on commissioning efforts for two new upgrades to DSSI: 1) an internal slit mask for astrometric calibration, and 2) a near-infrared channel configuration for the instrument operating at ~1.5µm. The near-infrared channel takes the place of one of the original optical channels, while the second channel of the instrument remains configured for optical observations. However, a two-position stage has been added to this optical channel, allowing for both of the original 692nm and 880nm filters. This represents the first near-infrared diffraction-limited imaging ever performed with DSSI, and the first for the ARC 3.5-m telescope, and a major step toward routine optical+NIR simultaneous speckle imaging for a range of science projects. The benefits of the internal slit mask and near-infrared channel configuration include improved astrometric precision, reduced time on-sky for calibrations, improved detection of lower luminosity companions including brown dwarfs, and a greater wavelength span for more robust source color determinations and H-R diagram positioning of system components.

The NASA K2 mission is finding many high-value exoplanets and world-wide follow-up is ensuing. The NASA TESS mission will soon be launched, requiring additional ground-based observations as well. As a part of the NASA-NSFNN-EXPLORE program to enable exoplanet research, our group is building two new speckle interferometry cameras for the Kitt Peak WIYN 3.5-m telescope and the Gemini-N 8-m telescope. Modeled after the successful DSSI visitor instrument that has been used at these telescopes for many years, speckle observations provide the highest resolution images available today from any ground- or space-based single telescope. They are the premier method through which small, rocky exoplanets can be validated. Available for public use in early 2017, WIYNSPKL and GEMSPKL will obtain simultaneous images in two filters with fast EMCCD readout, "speckle" and “wide-field” imaging modes, and user support for proposal writing, observing, and data reduction. We describe the new cameras, their design, and their benefits for exoplanet follow-up, characterization, and validation. Funding for this project comes from the NASA Exoplanet Exploration Program and NASA HQ.

The Southern Connecticut Stellar Interferometer (SCSI) is a portable optical intensity interferometer located on the campus of Southern Connecticut State University in New Haven, Connecticut. Since its completion in 2016, the instrument has been used to take engineering data of bright stars. This paper will discuss the data collection and analysis methods, as well as the progress toward reliably measuring a significant stellar photon correlation. Vega has been the main star chosen for test observations to date because its diameter is well known by other methods, and it is not an extended source for the baselines used. The correlation peak in the processed data is compared to theoretical expectations. Given our expected sensitivity, a significant correlation peak is expected for small baselines (~2 m) to appear after a few hours of observation. So far, the observations indicate that the correlation peak is at the expected time delay, and the signal-to-noise ratio roughly scales as predicted.

Two new instruments are currently being built for the Gemini-North and WIYN telescopes. They are based on the existing DSSI (Differential Speckle Survey Instrument), but the new dual-channel instruments will have both speckle and "wide-field" imaging capabilities. Nearly identical copies of the instrument will be installed as a public access permanent loan at the Gemini-N and WIYN telescopes. Many exoplanet targets will come from the NASA K2 and TESS missions. The faint limiting magnitude, for speckle observations, will remain around 16 to 17th magnitude depending on observing conditions, while wide-field, high speed imaging should be able to go to 21+. For Gemini, the instrument will be remotely operable from either the mid-level facility at Hale Pohaku or the remote operations base in Hilo. © 2016 SPIE.

QWSSI, the Quad-camera Wavefront-Sensing Speckle Imager, is a next-generation speckle imager that is being developed for Lowell Observatory's 4.3-meter Discovery Channel Telescopes. The principle behind QWSSI is to extend the capabilities of the speckle camera currently resident at Lowell, the Differential Speckle Survey Instrument (DSSI), in two ways. First, while DSSI currently observes in two visible channels, QWSSI will simultaneously observe in six narrow-band channels: four in the visible (0.5-0.9um), and one each in J- and H-band (1.2 and 1.6um). Second, the visible light unused for speckle imaging is carefully preserved and feeds a wavefront sensor (WFS), which is also run simultaneously with the speckle imaging. Simulations by Löbb (2016) indicate WFS data will provide significant gains in exploring stellar multiplicity, with marked improvements in primary-secondary contrast ratios and inner working angle (Horch et al. 2018). QWSSI will also be mountable on one of the three 1-meter telescopes being installed on the NPOI Array for engineering tests and preliminary science observations. QWSSI will expand on the already considerable exoplanetary work of the speckle imagers DSSI, NESSI (@ WIYN), Alopeke (Gemini-N), and Zorro (Gemini-S), improving the discovery space for existing targets, as well opening up new regions of that discovery space with its NIR channels.

Speckle interferometry at Yale started in 1994 with a three-year program of observations at the Yale Southern Observatory at El Leoncito, Argentina. After this experience, we began a long-term program of speckle observations at the WIYN 3.5-m telescope at Kitt Peak National Observatory, first using a MAMA detector, then CCD and finally EMCCD technology. We describe the evolution of the program, its main results in terms of discovered components, orbital parameters and masses. While the Yale program ended in 2013, it provided the springboard for continued speckle efforts at WIYN, the Discovery Channel 4.3-m Telescope, and the Gemini 8.1-m Telescopes for binary star research, exoplanet science, and other projects. An important outcome of this research will be the incorporation of the soon to be released high-precision Gaia parallaxes into our observations.

With observations from data sets available to the REsearch Consortium On Nearby Stars (RECONS, http://www.recons.org), we seek to define the orbits of several K dwarf multiple star systems. When compared to their more massive and less massive counterparts in G and M dwarfs, respectively, K dwarfs remain chiefly overlooked, merely due to the scarcity of data obtained on this stellar type. We address the sizes and shapes of the orbits, as established by their periods and eccentricities. The use of system separation, position angle, and magnitude, obtained from both our program measurements and the literature, will allow orbital construction, from which we ultimately derive the fundamental parameter, the mass. This work has been supported by NSF grants AST-1909560 and AST-1910130.

Many hot Jupiters (HJs) are detected by the Doppler and transit techniques. From surveys using these two techniques, however, the measured HJ occurrence rates differ by a factor of two or more. Using the California Planet Survey sample and the Kepler sample, we investigate the causes for this difference in the HJ occurrence rate. First, we find that 12.8% ± 0.24% of HJs are misidentified in the Kepler mission because of photometric dilution and subgiant contamination. Second, we explore the differences between the Doppler sample and the Kepler sample that can account for the different HJ occurrence rate. Third, we discuss how to measure the fundamental HJ occurrence rates by synthesizing the results from the Doppler and Kepler surveys. The fundamental HJ occurrence rates are measures of the HJ occurrence rate as a function of stellar multiplicity and evolutionary stage, e.g., the HJ occurrence rate for single and multiple stars or for main-sequence and subgiant stars. While we find qualitative evidence that HJs occur less frequently in subgiants and multiple stellar systems, we conclude that our current knowledge of stellar properties and the stellar multiplicity rate is too limited for us to reach any quantitative result for the fundamental HJ occurrence rates. This concern extends to ηEarth, the occurrence rate of Earth-like planets. © 2015. The American Astronomical Society. All rights reserved.

We present the first results from the POKEMON (Pervasive Overview of Kompanions of Every M-dwarf in Our Neighborhood) survey, the largest speckle survey of stellar multiplicity ever produced for the objects that comprise over 70% of the stars in our galaxy: the M-dwarfs. We have conducted a volume-limited survey through M9 that inspected, at diffraction-limited resolution, every M-dwarf out to 15pc, with additional brighter targets to 25pc. POKEMON utilized the Differential Speckle Survey Instrument (DSSI) at the 4.3m Lowell Discovery Telescope, along with the NN-Explore Exoplanet Stellar Speckle Imager (NESSI) on the 3.5-m WIYN telescope. We report the discovery of 30+ new companions to these nearby M-dwarfs. Given the priority these targets have for exoplanet studies with TESS, and in the future JWST - and the degree to which initially undetected multiplicity has skewed Kepler results - a comprehensive survey of our nearby low-mass neighbors provides a homogeneous, complete catalog of fundamental utility. Prior knowledge of secondary objects - or robust non-detections, as captured by this survey - immediately clarify the nature of exoplanet transit detections from these current and upcoming missions.