Your search

Intensity interferometry, which was first used for obtaining ultra-high-resolution image information in astronomy in the 1960's and 1970's, is now being revived using modern detectors and electronics. This paper explores the possibility of wireless optical interferometry made possible by technological advancements in timing correlation, signal processing, and detector technology. If this can be achieved, then baselines of one to several kilometers may be possible in optical interferometry in the coming years. This would improve the resolution over the current generation of amplitude-based optical interferometers by a factor of at least ten. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only. © 2015 SPIE.

In recent years, speckle imaging has proven very useful for certain problems in single-Aperture high-resolution imaging, including searching for faint stellar companions near exoplanet host stars and for satellite imaging. These developments have largely been the result of the availability of electron-multiplying CCD cameras, which allow for greater sensitivity and better photometric linearity when compared with other detectors that have comparable speed. This in turn has led to an increased use for speckle imaging at mid-sized and large telescopes. Some results of these efforts will be discussed, and the outlook for the future of speckle will be given. © 2016 SPIE.

Intensity interferometry, also known as the Hanbury Brown and Twiss effect, has seen significant interest in astronomy in recent years. The method involves recording timing correlations between photons received at two or more telescopes in order to derive extremely high spatial resolution information about an astronomical object, potentially including imaging stellar surfaces and other objects at unprecedented scales. This paper will briefly review the technique, discuss the performance characteristics of the of photon counters used in modern intensity interferometers, and describe opportunities for the future. As an example of photon counting with a working instrument, observing experiences with the Southern Connecticut Stellar Interferometer (SCSI), a three-station instrument using single-photon avalanche diode (SPAD) detectors, will be described. The recent lessons learned with this and other instruments in use today give a clear picture of the next steps needed to upgrade efficiency and successfully observe fainter objects. If successful, these improvements would provide a strong argument for creating situations where intensity interferometers can have baselines of one to several kilometers, which would unlock the spatial detail needed to address several exciting astrophysical questions.

Statistical characterization of secondary subsystems in binaries helps to distinguish between various scenarios of multiple-star formation. The Differential Speckle Survey Instrument was used at the Gemini-N telescope for several hours in 2015 July to probe the binarity of 25 secondary components in nearby solar-type binaries. Six new subsystems were resolved, with meaningful detection limits for the remaining targets. The large incidence of secondary subsystems agrees with other similar studies. The newly resolved subsystem HIP 115417 Ba,Bb causes deviations in the observed motion of the outer binary from which an astrometric orbit of Ba,Bb with a period of 117 years is deduced. © 2016. The American Astronomical Society. All rights reserved.

Recent work with the NESSI speckle camera at Kitt Peak and the 'Alopeke speckle camera at Gemini-North indicates that speckle data reduction techniques can be successfully modified to produce high-resolution images over fields that are at least tens of arc seconds across. While these wide-field speckle image reconstructions are not diffraction-limited, the improvement in resolution over the seeing-limited case can be substantial. In this paper, we explore the application of these techniques to data taken with a small (0.6-m) telescope in an urban environment. Many telescopes located in urban communities, such as New Haven, Connecticut, where Southern Connecticut State University resides, have limited use scientifically due to substantial light pollution, poor seeing, poor telescope tracking, and other issues. We will present initial data using our set-up and discuss the potential for this approach for improving the imaging capabilities of small telescopes on our campus and beyond.

A limitation of the current generation of long baseline optical interferometers is the need to make the light interfere prior to detection. This is unlike the radio regime where signals can be recorded fast enough to use electronics to accomplish the same result. This paper describes a modern optical intensity interferometer based on electronics with picosecond timing resolution. The instrument will allow for portable optical interferometry with much larger baselines than currently possible by using existing large telescopes. With modern electronics, the limiting magnitude of the technique at a 4-m aperture size becomes competitive with some amplitude-based interferometers. The instrumentation will permit a wireless mode of operation with GPS clocking technology, extending the work to extremely large baselines. We discuss the basic observing strategy, a planned observational program at the Lowell Observatory 1.8-m and 1.0-m telescopes, and the science that can realistically be done with this instrumentation. © 2012 SPIE.

Recent speckle observations performed at the Discovery Channel Telescope, the Gemini North Telescope, and the Special Astrophysical Observatory 6 m Telescope have permitted us to calculate the visual orbit of SB2 HD 114882 for the first time and to improve the visual orbits of two other SB2 systems, HD 30712 and HD 183255, using algorithms published by the authors of this research. Recently, new high-quality spectroscopic orbits have been obtained for these binaries by other authors. We determine their 3D orbits, individual masses, and orbital parallaxes, and present them in this paper. The parallaxes are compared with those available from the Gaia mission, and a comparison between the values confirms the precision of the results obtained here. © 2018. The American Astronomical Society. All rights reserved.

It is well known that in spectroscopic binary orbits, the inclination, the ascending node, and the semimajor axis remain undetermined, therefore the principal objective of this research is to establish an analytic methodology for the calculation of these parameters for spectroscopic binaries, both single-lined (SB1) and double-lined (SB2). In other words, the goal is to determine their “three-dimensional” orbits using a single speckle measurement (ρ, θ, t) and the parallax (π). Moreover, estimates of the individual masses of each system can also be obtained. The proposed algorithm was successfully applied to SB1 systems: YSC 148 (HD 37393) and CHR 225 (HD 34318), and SB2 systems: LSC 1 Aa1,2 (HD 200077) and Mkt 11 Aa, Ab (HD 358). In this late case, previously determined spectroscopic and visual orbits have been used to compare and contrast the results obtained from them with our results. The methodology presented is especially interesting for those cases in which it is only possible to resolve the spectroscopic binary in the zones of maximum angular separation by optical means thereby making it impossible to avail of sufficient observations in order to calculate the visual orbit. © Pleiades Publishing, Ltd. 2014.

The Southern Connecticut Stellar Interferometer (SCSI) is a portable optical intensity interferometer located on the campus of Southern Connecticut State University in New Haven, Connecticut. Since its completion in 2016, the instrument has been used to take engineering data of bright stars. This paper will discuss the data collection and analysis methods, as well as the progress toward reliably measuring a significant stellar photon correlation. Vega has been the main star chosen for test observations to date because its diameter is well known by other methods, and it is not an extended source for the baselines used. The correlation peak in the processed data is compared to theoretical expectations. Given our expected sensitivity, a significant correlation peak is expected for small baselines (~2 m) to appear after a few hours of observation. So far, the observations indicate that the correlation peak is at the expected time delay, and the signal-to-noise ratio roughly scales as predicted.

Two new instruments are currently being built for the Gemini-North and WIYN telescopes. They are based on the existing DSSI (Differential Speckle Survey Instrument), but the new dual-channel instruments will have both speckle and "wide-field" imaging capabilities. Nearly identical copies of the instrument will be installed as a public access permanent loan at the Gemini-N and WIYN telescopes. Many exoplanet targets will come from the NASA K2 and TESS missions. The faint limiting magnitude, for speckle observations, will remain around 16 to 17th magnitude depending on observing conditions, while wide-field, high speed imaging should be able to go to 21+. For Gemini, the instrument will be remotely operable from either the mid-level facility at Hale Pohaku or the remote operations base in Hilo. © 2016 SPIE.

With observations from data sets available to the REsearch Consortium On Nearby Stars (RECONS, http://www.recons.org), we seek to define the orbits of several K dwarf multiple star systems. When compared to their more massive and less massive counterparts in G and M dwarfs, respectively, K dwarfs remain chiefly overlooked, merely due to the scarcity of data obtained on this stellar type. We address the sizes and shapes of the orbits, as established by their periods and eccentricities. The use of system separation, position angle, and magnitude, obtained from both our program measurements and the literature, will allow orbital construction, from which we ultimately derive the fundamental parameter, the mass. This work has been supported by NSF grants AST-1909560 and AST-1910130.

Many hot Jupiters (HJs) are detected by the Doppler and transit techniques. From surveys using these two techniques, however, the measured HJ occurrence rates differ by a factor of two or more. Using the California Planet Survey sample and the Kepler sample, we investigate the causes for this difference in the HJ occurrence rate. First, we find that 12.8% ± 0.24% of HJs are misidentified in the Kepler mission because of photometric dilution and subgiant contamination. Second, we explore the differences between the Doppler sample and the Kepler sample that can account for the different HJ occurrence rate. Third, we discuss how to measure the fundamental HJ occurrence rates by synthesizing the results from the Doppler and Kepler surveys. The fundamental HJ occurrence rates are measures of the HJ occurrence rate as a function of stellar multiplicity and evolutionary stage, e.g., the HJ occurrence rate for single and multiple stars or for main-sequence and subgiant stars. While we find qualitative evidence that HJs occur less frequently in subgiants and multiple stellar systems, we conclude that our current knowledge of stellar properties and the stellar multiplicity rate is too limited for us to reach any quantitative result for the fundamental HJ occurrence rates. This concern extends to ηEarth, the occurrence rate of Earth-like planets. © 2015. The American Astronomical Society. All rights reserved.

As hundreds of gas giant planets have been discovered, we study how these planets form and evolve in different stellar environments, specifically in multiple stellar systems. In such systems, stellar companions may have a profound influence on gas giant planet formation and evolution via several dynamical effects such as truncation and perturbation. We select 84 Kepler Objects of Interest (KOIs) with gas giant planet candidates. We obtain high-angular resolution images using telescopes with adaptive optics (AO) systems. Together with the AO data, we use archival radial velocity data and dynamical analysis to constrain the presence of stellar companions. We detect 59 stellar companions around 40 KOIs for which we develop methods of testing their physical association. These methods are based on color information and galactic stellar population statistics. We find evidence of suppressive planet formation within 20 AU by comparing stellar multiplicity. The stellar multiplicity rate (MR) for planet host stars is 0+5-0% within 20 AU. In comparison, the stellar MR is 18% ± 2% for the control sample, i.e., field stars in the solar neighborhood. The stellar MR for planet host stars is 34% ± 8% for separations between 20 and 200 AU, which is higher than the control sample at 12% ± 2%. Beyond 200 AU, stellar MRs are comparable between planet host stars and the control sample. We discuss the implications of the results on gas giant planet formation and evolution. © 2015. The American Astronomical Society. All rights reserved.

We report a comprehensive study of the binary system COU 2031, based on simultaneous and independent astrometric visual and speckle observations and on radial-velocity measurements. The similarity of the two orbital solutions allows us to obtain not only a consistent 3D orbit and a precise value of the parallax of the system but also to determine the physical properties of the components. © 2014 The Authors.

It is well established that roughly half of all nearby solar-type stars have at least one companion. Stellar companions can have significant implications for the detection and characterization of exoplanets, including triggering false positives and masking the true radii of planets. Determining the fraction of exoplanet host stars that are also binaries allows us to better determine planetary characteristics as well as establish the relationship between binarity and planet formation. Using high angular resolution speckle imaging, we detect stellar companions within ∼1 arcsec of K2 planet-candidate host stars. Comparing our detected companion rate to TRILEGAL star count simulations and known detection limits of speckle imaging, we estimate the binary fraction of K2 planet host stars to be 40%-50%, similar to that of Kepler exoplanet hosts and field stars. © 2018. The American Astronomical Society. All rights reserved.

A new speckle and wide-field imaging instrument for the WIYN telescope called NN-EXPLORE Exoplanet Stellar Speckle Imager (NESSI) is described. NESSI offers simultaneous two-color diffraction-limited imaging and wide-field traditional imaging for validation and characterization of transit and precision RV exoplanet studies. Many exoplanet targets will come from the NASA K2 and Transiting Exoplanet Survey Satellite (TESS) missions. NESSI is capable of resolving close binaries at sub-arcsecond separations down to the diffraction limit and >6 mag contrast difference in the visible band on targets as faint as 14th mag. Preliminary results from the instrument commissioning at WIYN and demonstrations of the instrument’s capabilities are presented. © 2018. The Astronomical Society of the Pacific. Printed in the U.S.A.

We present a study on the effect of undetected stellar companions on the derived planetary radii for Kepler Objects of Interest (KOIs). The current production of the KOI list assumes that each KOI is a single star. Not accounting for stellar multiplicity statistically biases the planets toward smaller radii. The bias toward smaller radii depends on the properties of the companion stars and whether the planets orbit the primary or the companion stars. Defining a planetary radius correction factor, XR, we find that if the KOIs are assumed to be single, then, on average, the planetary radii may be underestimated by a factor of 〈XR〉 ≈ 1.5. If typical radial velocity and high-resolution imaging observations are performed and no companions are detected, then this factor reduces to 〈XR〉 ≈ 1.2. The correction factor 〈XR〉 is dependent on the primary star properties and ranges from 〈XR〉 ≈ 1.6 for A and F stars to 〈XR〉 ≈ 1.2 for K and M stars. For missions like K2 and TESS where the stars may be closer than the stars in the Kepler target sample, observational vetting (primary imaging) reduces the radius correction factor to 〈XR〉 ≈ 1.1. Finally, we show that if the stellar multiplicity rates are not accounted for correctly, then occurrence rate calculations for Earth-sized planets may overestimate the frequency of small planets by as much as 15%-20%. © 2015. The American Astronomical Society. All rights reserved.

We present the results of 71 speckle observations of binary and unresolved stars, most of which were observed with the DSSI speckle camera at the Gemini North Telescope in 2012 July. The main purpose of the run was to obtain diffraction-limited images of high-priority targets for the Kepler and CoRoT missions, but in addition, we observed a number of close binary stars where the resolution limit of Gemini was used to better determine orbital parameters and/or confirm results obtained at or below the diffraction limit of smaller telescopes. Five new binaries and one triple system were discovered, and first orbits are calculated for other two systems. Several systems are discussed in detail. © 2012. The American Astronomical Society. All rights reserved..