Your search
Results 3 resources
-
High Entropy Alloys are inherently complex and span a vast composition space, making their research and discovery challenging. Developing quantitative predictions of their phase selection requires a large quantity of consistently determined experimental data. Here, we use combinatorial methods to fabricate and characterize 2478 quinary alloys based on Al and transition metals. All data are publicly available at http://materialsatlasproject.org/. Phase selection can be predicted for considered alloys when combining the content of FCC/BCC elements and the constituents’ atomic size difference. Mining our data reveals that High Entropy Alloys with increasing atomic size difference prefer BCC structure over FCC. This preference is typically overshadowed by other selection motifs, which dominate during close-to-equilibrium processing. Not suggested by the Hume-Rothery rules, this preference originates from the ability of the BCC structure to accommodate a large atomic size difference with lower strain energy penalty which can be practically only realized in High Entropy Alloys. © 2019 Acta Materialia Inc.
-
Supercapacitors or electrochemical capacitors are receiving greater interest because of their high-power density, long life, and low maintenance. We have synthesized CuS nanoparticles and graphene oxide (CuS-GO) nanocomposites for supercapacitor applications because of their low cost and excellent electrochemical properties. The phase purity of each material was determined using powder XRD studies. The bandgap was determined by UV-visible spectrophotometric studies. Scanning electron microscope and transmission electron microscope images revealed the nano-scale morphology of the synthesized particles. All the electrochemical measurements were conducted in a standard three-electrode configuration, using a platinum wire as the counter electrode and Hg/HgO as the reference electrode. CuS and its composites with graphene oxide on nickel foam were used as working electrodes. All the electrochemical measurements were performed in 3M KOH solution. The CuS-GO nanocomposite electrode showed a specific capacitance of 250 F/g, 225 F/g, 182 F/g, 166 F/g, 161 F/g, and 158 F/g at a current density of 0.5 A/g, 1 A/g, 5 A/g, 10 A/g, 15 A/g, and 20 A/g, respectively. CuS-GO electrodes showed a specific capacitance retention of 70% after 5000 charge-discharge cycles at a current density of 5 A/g. © 2020 Author(s).
-
Graphene oxide (GO)/MnO2 nanocomposites were synthesized by adding KMnO4 in a solution of water and ethanol (3:1), containing 10 mg of GO. Brown precipitates were obtained after a continuous stirring for 1 hr. The precipitates were then washed with deionized water (DI) water and dried to obtain the MnO2-GO nanocomposites. Pure MnO2 was also synthesized using the same method without GO for the comparison. X-ray diffraction pattern confirm δ-MnO2 type of MnO2 with birnessite type MnO2 structure. The TEM images show the average diameter of MnO2 nanorods as 15 nm. Electrochemical characterizations were carried out in an aqueous solution of 3M KOH. Charge-discharge studies were carried out between 1A/g to 20 A/g current range. The MnO2-GO nanocomposites showed improved electrochemical performances. The capacitance of MnO2 and MnO2-GO electrodes was found to be as 300 F/g, and 350 F/g, respectively at a current of 0.5 A/g. © 2019 Materials Research Society.
Explore
Resource type
- Journal Article (3)
Publication year
-
Between 2000 and 2026
-
Between 2010 and 2019
(2)
- 2019 (2)
-
Between 2020 and 2026
(1)
- 2020 (1)
-
Between 2010 and 2019
(2)
Resource language
- English (3)