Your search

Using our state-of-the-art 2-channel speckle imaging instrument, we have recently obtained diffraction-limited optical images at the 8-m Gemini-N telescope. The primary science goal was to search for faint (delta_mag = 4-6 mag) and nearby (<0.05") stellar companions around potential planet hosting stars as part of the small small exoplanet validation for the NASA Kepler and ESA CoRoT missions. As a demonstration of the instrument capabilities on Gemini, we achieved an angular resolution of ~20 mas which yielded the highest resolution ground-based optical image of the Pluto-Charon system ever obtained. Our instrument is likely to return to Gemini-N in mid-2013 for observations by general community programs

We measure the mass of a modestly irradiated giant or "warm Jupiter," KOI-94d, in order to calculate its density. We wish to determine whether this planet, which is in a 22 day orbit and receives 107 times as much incident flux as the Earth, is bloated like "hot Jupiters" or as dense as our own Jupiter. In addition to its warm Jupiter, KOI-94 hosts at least 3 smaller planets, all of which were detected through transits by the Kepler Mission. This presents the opportunity to characterize a multi-planet system and to test dynamic stability and formation theory through observations of the masses and orbital elements of these planets. With 26 radial velocity measurements of KOI-94 from the W. M. Keck Observatory/HIRES, we measure the mass of the giant planet and upper limits to the masses of the three smaller planets. Transit timing variations will allow us to hone the mass measurements of the three smaller planets. Using the KOI-94 system and all other planets with published values for both mass and radius, we establish two fundamental planes for exoplanets that relate their mass, incident flux, and radius from a few Earth masses up to ten Jupiter masses: log(Rp/RE) = 0.007 + 0.53 log(M/ME) - 0.001 log(F/[erg/s/cm^2]) for Mp < 150ME; log(Rp/RE) = 0.67 - 0.036 log(M/ME) + 0.06 log(F/[erg/s/cm^2]) for Mp > 150ME. We also solve these planes in density-mass-flux space: log(ρp/[g/cm^3]) = 0.69 - 0.57 log(M/ME) + 0.02 log(F/[erg/s/cm^2]) for Mp < 150ME; log(ρp/[g/cm^3]) = -1.23 + 1.10 log(M/ME) - 0.18 log(F/[erg/s/cm^2]) for Mp > 150ME.

We present the validation and characterization of Kepler-61b: a 2.5 R_Earth planet orbiting near the inner edge of the habitable zone of a low-mass star. Our characterization of the host star Kepler-61 is based upon our identification of a spectroscopically similar star located 4.9 pc from Earth. This proxy star to Kepler-61 has a published direct interferometric radius and effective temperature measurement, which we apply in tandem with the Kepler photometry to characterize the planet Kepler-61b. The technique of identifying a nearby proxy star with directly measured properties allows for an independent check on stellar characterization via the traditional measurements with stellar spectra and evolutionary models. In this case, such a check had profound implications for the putative habitability of Kepler-61b. This work was performed in part under contract with the California Institute of Technology (Caltech) funded by NASA through the Sagan Fellowship Program

The influence of defects on the local structural, electronic, and chemical properties of a surface oxide on Cu(100) were investigated using atomic resolution three-dimensional force mapping combined with tunneling current measurements and ab initio density functional theory. Results reveal that the maximum attractive force between tip and sample occurs above the oxygen atoms; theory indicates that the tip, in this case, terminates in a Cu atom. Meanwhile, simultaneously acquired tunneling current images emphasize the positions of Cu atoms, thereby, providing species-selective contrast in the two complementary data channels. One immediate outcome is that defects due to the displacement of surface copper are exposed in the current maps, even though force maps only reflect a well-ordered oxygen sublattice. The exact nature of the defects is confirmed by the simulations, which also reveal that the arrangement of the oxygen atoms is not disrupted by the copper displacement. In addition, the experimental force maps uncover a position-dependent modulation of the attractive forces between the surface oxygen and the copper-terminated tips, which is found to reflect the surface's inhomogeneous chemical and structural environment. As a consequence, the demonstrated method has the potential to directly probe how defects affect surface chemical interactions. © 2013 American Physical Society.

This multi-phased study investigates the learning outcomes of courses taught in the K-14 classroom. Specifically, the methods and practices teachers use to develop and encourage 21st Century Skills including critical thinking skills and technological fluency in all subject areas, STEM and non-STEM related, are of great interest. Currently, these skills are in high demand in fields which develop advanced materials and are the backbone of the National Academies-developed Frameworks for K-12 Science Education. Phase I participants in this study included high school and college educators while Phase II of the study will involve K-14 students. In this study, educators were asked to rate their teaching self-efficacy in two primary areas: critical thinking skills and technological fluency. This included questions related to components in their current curriculum as well as methods of assessment [e.g., rubrics]. The instrument created to measure self-efficacy was based on a modified 'Science Teaching Efficacy Belief Instrument' (STEBI). All participants were from Connecticut. Results indicate that both STEM and non-STEM related subject areas offer an equally rich array of opportunities to effectively teach critical thinking and technological fluency at a variety of educational levels. The impact of Professional Development on teacher self-efficacy was of particular importance, especially in K-12 education. © 2013 Materials Research Society.

Binary and multiple stellar systems have importance in three main areas of astronomy and astrophysics. First, because of the relatively simple gravitational interaction at work in the case of binary stars, these systems provide a basic check on stellar structure and evolution theory since the masses may be determined through observation. When these masses can be linked to other properties of the two stars, such as luminosity, color, and radius, they can provide very stringent constraints on stellar models. Second, the statistics of binary and multiple star systems provide clues to star formation mechanisms and environmental effects in the galactic gravitational potential and in clusters. Although a number of good results have been obtained in nearby star clusters and associations, knowledge of the field population has been somewhat limited until recently by a lack of large, complete samples of binaries. However, there appears to be a great deal of promise in this area for the coming decade in part due to astrometric satellites such as Hipparcos and Gaia. Third, the binary scenario is invoked to explain several important types of astrophysical phenomena such as Type Ia supernovae, cataclysmic variables, and stellar x-ray sources. Since the first of these mentioned is a standard candle for the extragalactic distance scale, it may even be said binary stars play a minor role in field of cosmology. However, in this chapter, the focus will mainly be on normal stars in binary and multiple-stellar systems. The basic physics of binaries will be reviewed, and the observational methods in use today will be discussed together with their limitations and prospects for the future. Finally, an overview of the current science in the three main areas mentioned where binaries have a significant impact will be given. © Springer Science+Business Media Dordrecht 2013.

A comprehensive analysis of contrast formation mechanisms in scanning tunneling microscopy (STM) experiments on a metal oxide surface is presented with the oxygen-induced (2√2×√2)R45 missing row reconstruction of the Cu(100) surface as a model system. Density functional theory and electronic transport calculations were combined to simulate the STM imaging behavior of pure and oxygen-contaminated metal tips with structurally and chemically different apexes while systematically varying bias voltage and tip-sample distance. The resulting multiparameter database of computed images was used to conduct an extensive comparison with experimental data. Excellent agreement was attained for a large number of cases, suggesting that the assumed model tips reproduce most of the commonly encountered contrast-determining effects. Specifically, we find that depending on the bias voltage polarity, copper-terminated tips allow selective imaging of two structurally distinct surface Cu sites, while oxygen-terminated tips show complex contrasts with pronounced asymmetry and tip-sample distance dependence. Considering the structural and chemical stability of the tips reveals that the copper-terminated apexes tend to react with surface oxygen at small tip-sample distances. In contrast, oxygen-terminated tips are considerably more stable, allowing exclusive surface oxygen imaging at small tip-sample distances. Our results provide a conclusive understanding of fundamental STM imaging mechanisms, thereby providing guidelines for experimentalists to achieve chemically selective imaging by properly selecting imaging parameters. © 2013 American Chemical Society.

: Most stars and their planets form in open clusters. Over 95 per cent of such clusters have stellar densities too low (less than a hundred stars per cubic parsec) to withstand internal and external dynamical stresses and fall apart within a few hundred million years 1. Older open clusters have survived by virtue of being richer and denser in stars (1,000 to 10,000 per cubic parsec) when they formed. Such clusters represent a stellar environment very different from the birthplace of the Sun and other planet-hosting field stars. So far more than 800 planets have been found around Sun-like stars in the field 2. The field planets are usually the size of Neptune or smaller 3,4,5. In contrast, only four planets have been found orbiting stars in open clusters 6,7,8, all with masses similar to or greater than that of Jupiter. Here we report observations of the transits of two Sun-like stars by planets smaller than Neptune in the billion-year-old open cluster NGC6811. This demonstrates that small planets can form and survive in a dense cluster environment, and implies that the frequency and properties of planets in open clusters are consistent with those of planets around field stars in the Galaxy., (C) 2013 Nature Publishing Group

Advances in detector technology and electronic timing capabilities in recent years have resulted in a new opportunity for ultra-high resolution in astronomy using intensity interferometry. We have been working with this technology and describe here the potential as we see it. Two separate opportunities exist at present: The use of Single Photon Avalanche Diode (SPAD) detectors with existing research-grade telescopes and photomultipliers coupled with light bucket telescopes. In the future, there may also be potential for space-based intensity interferometry. While intensity interferometry is not likely to replace amplitude-based interferometry, it does have certain advantages in terms of portability, use of large baselines, narrow-band imaging, and imaging in the blue. We see a new possibility for its use particularly in stellar astrophysics for these reasons. © 2013 World Scientific Publishing Company.

We present the discovery and characterization of a giant planet orbiting the young Sun-like star Kepler-63 (KOI-63, M⊙Kp = 11.6, T eff = 5576 K, M⊙ = 0.98 M⊙). The planet transits every 9.43 days, with apparent depth variations and brightening anomalies caused by large starspots. The planet's radius is 6.1 ± 0.2 R ⊕, based on the transit light curve and the estimated stellar parameters. The planet's mass could not be measured with the existing radial-velocity data, due to the high level of stellar activity, but if we assume a circular orbit, then we can place a rough upper bound of 120 M ⊙⊕ (3σ). The host star has a high obliquity (ψ = 104°), based on the Rossiter-McLaughlin effect and an analysis of starspot-crossing events. This result is valuable because almost all previous obliquity measurements are for stars with more massive planets and shorter-period orbits. In addition, the polar orbit of the planet combined with an analysis of spot-crossing events reveals a large and persistent polar starspot. Such spots have previously been inferred using Doppler tomography, and predicted in simulations of magnetic activity of young Sun-like stars. © 2013. The American Astronomical Society. All rights reserved..

We present the validation and characterization of Kepler-61b: a 2.15 R ⊕ planet orbiting near the inner edge of the habitable zone of a low-mass star. Our characterization of the host star Kepler-61 is based upon a comparison with a set of spectroscopically similar stars with directly measured radii and temperatures. We apply a stellar prior drawn from the weighted mean of these properties, in tandem with the Kepler photometry, to infer a planetary radius for Kepler-61b of 2.15 ± 0.13 R ⊕ and an equilibrium temperature of 273 ± 13 K (given its period of 59.87756 ± 0.00020 days and assuming a planetary albedo of 0.3). The technique of leveraging the physical properties of nearby “proxy” stars allows for an independent check on stellar characterization via the traditional measurements with stellar spectra and evolutionary models. In this case, such a check had implications for the putative habitability of Kepler-61b: the planet is 10% warmer and larger than inferred from K-band spectral characterization. From the Kepler photometry, we estimate a stellar rotation period of 36 days, which implies a stellar age of >1 Gyr. We summarize the evidence for the planetary nature of the Kepler-61 transit signal, which we conclude is 30,000 times more likely to be due to a planet than a blend scenario. Finally, we discuss possible compositions for Kepler-61b with a comparison to theoretical models as well as to known exoplanets with similar radii and dynamically measured masses.

We present Spitzer/IRAC 4.5 μm transit photometry of GJ 3470 b, a Neptune-size planet orbiting an M1.5 dwarf star with a 3.3 day period recently discovered in the course of the HARPS M-dwarf survey. We refine the stellar parameters by employing purely empirical mass-luminosity and surface brightness relations constrained by our updated value for the mean stellar density, and additional information from new near-infrared spectroscopic observations. We derive a stellar mass of and a radius of of M* = 0.539 +0.047-0.043 M⊙ and a radius of R* = 0.568+0.037-0.031 R⊙. We determine the host star of GJ 3470 b to be metal-rich, with a metallicity of [Fe/H] = +0.20 ± 0.10 and an effective temperature of Teff = 3600 ± 100 K. The revised stellar parameters yield a planetary radius Rp= 4.83+0.22-0.21 R⊕that is 13% larger than the value previously reported in the literature. We find a planetary mass M p= 13.9+1.5-1.4 M⊕ that translates to a very low planetary density, ρp = 0.72+0.13 -0.12 g cm-3, which is 33% smaller than the original value. With a mean density half of that of GJ 436 b, GJ 3470 b is an example of a very low-density low-mass planet, similar to Kepler-11 d, Kepler-11 e, and Kepler-18 c, but orbiting a much brighter nearby star that is more conducive to follow-up studies. © 2013. The American Astronomical Society. All rights reserved.

We measure the mass of a modestly irradiated giant planet, KOI-94d. We wish to determine whether this planet, which is in a 22 day orbit and receives 2700 times as much incident flux as Jupiter, is as dense as Jupiter or rarefied like inflated hot Jupiters. KOI-94 also hosts at least three smaller transiting planets, all of which were detected by the Kepler mission. With 26 radial velocities of KOI-94 from the W. M. Keck Observatory and a simultaneous fit to the Kepler light curve, we measure the mass of the giant planet and determine that it is not inflated. Support for the planetary interpretation of the other three candidates comes from gravitational interactions through transit timing variations, the statistical robustness of multi-planet systems against false positives, and several lines of evidence that no other star resides within the photometric aperture. We report the properties of KOI-94b (M P = 10.5 ± 4.6 M ⊕, R P = 1.71 ± 0.16 R ⊕, P = 3.74 days), KOI-94c (M P = M ⊕, R P = 4.32 ± 0.41 R ⊕, P = 10.4 days), KOI-94d (M P = 106 ± 11 M ⊕, R P = 11.27 ± 1.06 R ⊕, P = 22.3 days), and KOI-94e (M P = M ⊕, R P = 6.56 ± 0.62 R ⊕, P = 54.3 days). The radial velocity analyses of KOI-94b and KOI-94e offer marginal (>2σ) mass detections, whereas the observations of KOI-94c offer only an upper limit to its mass. Using the KOI-94 system and other planets with published values for both mass and radius (138 exoplanets total, including 35 with M P < 150 M ⊕), we establish two fundamental planes for exoplanets that relate their mass, incident flux, and radius from a few Earth masses up to 13 Jupiter masses: (R P/R ⊕) = 1.78(M P/M ⊕)0.53(F/erg s–1 cm–2)–0.03 for M P < 150 M ⊕, and R P/R ⊕ = 2.45(M P/M ⊕)–0.039(F/erg s–1 cm–2)0.094 for M P > 150 M ⊕. These equations can be used to predict the radius or mass of a planet.

Since the discovery of the first exoplanets, it has been known that other planetary systems can look quite unlike our own. Until fairly recently, we have been able to probe only the upper range of the planet size distribution, and, since last year, to detect planets that are the size of Earth or somewhat smaller. Hitherto, no planets have been found that are smaller than those we see in the Solar System. Here we report a planet significantly smaller than Mercury. This tiny planet is the innermost of three that orbit the Sun-like host star, which we have designated Kepler-37. Owing to its extremely small size, similar to that of the Moon, and highly irradiated surface, the planet, Kepler-37b, is probably rocky with no atmosphere or water, similar to Mercury. © 2013 Macmillan Publishers Limited. All rights reserved.