Your search

The information and skills build to Chapter 10, where the work of a grassroots organization was investigated and how that work coincides with other advocacy and policy issues. Grassroots advocacy is a specific form of advocacy that starts from the roots (i.e., from the community itself) and grows upward from there. This is where the advocate deepens their knowledge about partnership building and collaboration and how it serves the profession to further the development of changes needed. Professional organizations and associations become important to the advocacy efforts at this level, and how to work together on the issues is shared.

​The hands-on textbook covers both the theory and applications of data communications, the Internet, and network security technology, following the ACM guideline for courses in networking. The content is geared towards upper undergraduate and graduate students in information technology, communications engineering, and computer science. The book is divided into three sections: Data Communications, Internet Architecture, and Network Security. Topics covered include flow control and reliable transmission; modulation, DSL, cable modem, and FTTH; Ethernet and Fast Ethernet; gigabit and 10 gigabit Ethernet; and LAN interconnection devices, among others. The book also covers emerging topics such as IPv6 and software defined networks. The book is accompanied with a lab manual which uses Wireshark, Cisco Packet Tracer, and virtual machines to lead students through simulated labs.

Electron-multiplying CCD (EMCCD) cameras have extremely strong characteristics for speckle imaging including high quantum efficiency, extremely low effective read noise, and high bandwidth. We report on our first results for binary star astrometry and photometry using an Andor iXon EMCCD at the WIYN 3.5-m Telescope at Kitt Peak. We find that diffraction-limited image reconstructions can be achieved to approximately 15th magnitude and that the device appears to deliver reliable differential photometry of the components of binary star systems. Some implications for stellar astrophysics are discussed.

After the success of Hanbury Brown, Davis, and their collaborators in measuring all stellar diameters resolvable by the 166-m interferometer at Narrabri nearly four decades ago, research into optical intensity interferometry was largely discontinued. Signal-to-noise ratios and timing resolutions limited the technique to relatively bright stars over a narrow bandwidth. Modern photon-correlation electronics, however, may help to revive the technique, allowing for increased temporal resolution and longer baselines. In this paper, the PicoHarp 300 Time-Correlated Single Photon Counting System is characterized in order to demonstrate its ability to perform interferometric measurements. Time correlations of coherent and incoherent source apertures are measured and their autocorrelations compared with theory. The speed of light is also directly measured using the shift in temporal correlation between offset detectors. Finally, the possibility of two independent systems, linked between two large-aperture telescopes, is discussed with the goal of determining whether longer baselines can be achieved.

Electron-multiplying CCD cameras are now being widely used in speckle imaging, and have been shown to deliver excellent photometric precision under good observing conditions. Successful image reconstructions have been made on binary stars fainter than 14th magnitude. However, improving the speckle signal-to-noise ratio and the fidelity of image reconstructions for faint sources would be extremely helpful in several areas of research where diffraction-limited images are required, including our own ongoing speckle observations of Kepler exoplanet candidate stars using the WIYN Telescope at Kitt Peak. In this paper, we investigate (1) robust cosmic ray rejection and (2) removal of low signal-to-noise frames as two ways to maximize data quality for faint source observations. Cosmic ray rejection is not normally a major concern in speckle imaging due to the brightness of the targets traditionally observed and the short frame times. Nonetheless, when imaging faint targets, more frames are needed to achieve a given signal-to-noise ratio, increasing the chance of cosmic ray events on the detector, and even a single cosmic ray hit in the frame sequence can significantly affect the source detection ability and photometry obtained in the observation. Similarly, faint sources often exhibit some frames with a well-defined image core while in other frames it is difficult to tell if the source is even present, primarily due to seeing variation during the observation. A new speckle reduction algorithm has been created that removes cosmic rays without throwing out frames and rejects frames with bad seeing, and its performance is investigated to determine to what extent this can improve source detection and photometric reliability in the final reconstructed image. Funding for this work was provided by the Kepler Science Center and by NSF Grant AST-0908125.

The Differential Speckle Survey Instrument (DSSI) is a dual-channel speckle imaging system that takes speckle patterns in two colors simultaneously using two electron-multiplying CCD cameras. The system has been shown to deliver excellent photometry of binary stars under good observing conditions, which raises the question of whether results of similar quality can be obtained on extended objects such as minor planets, and if so, to what limiting magnitude. In this study, we present speckle image reconstructions of images of 2 Pallas, 216 Kleopatra, and 283 Emma made from data taken at the WIYN 3.5-m Telescope at Kitt Peak. We compare two different phase reconstruction algorithms: (1) an iterative technique, and (2) a relaxation technique. Since Pallas is a flattened disk, Kleopatra has a dumbbell shape, and Emma is a binary asteroid with known orbital parameters, these three targets represent three distinct image morphologies that allow for a robust comparison of the two phase reconstruction programs. Prospects for future work in this area with DSSI are discussed. This work is funded by NSF grant AST-0908125.

Using our state-of-the-art 2-channel speckle imaging instrument, we have recently obtained diffraction-limited optical images at the 8-m Gemini-N telescope. The primary science goal was to search for faint (delta_mag = 4-6 mag) and nearby (<0.05") stellar companions around potential planet hosting stars as part of the small small exoplanet validation for the NASA Kepler and ESA CoRoT missions. As a demonstration of the instrument capabilities on Gemini, we achieved an angular resolution of ~20 mas which yielded the highest resolution ground-based optical image of the Pluto-Charon system ever obtained. Our instrument is likely to return to Gemini-N in mid-2013 for observations by general community programs

We measure the mass of a modestly irradiated giant or "warm Jupiter," KOI-94d, in order to calculate its density. We wish to determine whether this planet, which is in a 22 day orbit and receives 107 times as much incident flux as the Earth, is bloated like "hot Jupiters" or as dense as our own Jupiter. In addition to its warm Jupiter, KOI-94 hosts at least 3 smaller planets, all of which were detected through transits by the Kepler Mission. This presents the opportunity to characterize a multi-planet system and to test dynamic stability and formation theory through observations of the masses and orbital elements of these planets. With 26 radial velocity measurements of KOI-94 from the W. M. Keck Observatory/HIRES, we measure the mass of the giant planet and upper limits to the masses of the three smaller planets. Transit timing variations will allow us to hone the mass measurements of the three smaller planets. Using the KOI-94 system and all other planets with published values for both mass and radius, we establish two fundamental planes for exoplanets that relate their mass, incident flux, and radius from a few Earth masses up to ten Jupiter masses: log(Rp/RE) = 0.007 + 0.53 log(M/ME) - 0.001 log(F/[erg/s/cm^2]) for Mp < 150ME; log(Rp/RE) = 0.67 - 0.036 log(M/ME) + 0.06 log(F/[erg/s/cm^2]) for Mp > 150ME. We also solve these planes in density-mass-flux space: log(ρp/[g/cm^3]) = 0.69 - 0.57 log(M/ME) + 0.02 log(F/[erg/s/cm^2]) for Mp < 150ME; log(ρp/[g/cm^3]) = -1.23 + 1.10 log(M/ME) - 0.18 log(F/[erg/s/cm^2]) for Mp > 150ME.

We present the validation and characterization of Kepler-61b: a 2.5 R_Earth planet orbiting near the inner edge of the habitable zone of a low-mass star. Our characterization of the host star Kepler-61 is based upon our identification of a spectroscopically similar star located 4.9 pc from Earth. This proxy star to Kepler-61 has a published direct interferometric radius and effective temperature measurement, which we apply in tandem with the Kepler photometry to characterize the planet Kepler-61b. The technique of identifying a nearby proxy star with directly measured properties allows for an independent check on stellar characterization via the traditional measurements with stellar spectra and evolutionary models. In this case, such a check had profound implications for the putative habitability of Kepler-61b. This work was performed in part under contract with the California Institute of Technology (Caltech) funded by NASA through the Sagan Fellowship Program

We report on the work to validate twelve candidate-transiting planets from Kepler with orbital periods ranging from 34 to 207 days initially identified in the pipeline search of three years of Kepler data from quarters 1 to 12. The candidates were selected based on pipeline Data Validation models indicating that they are small and potentially in the habitable zone (HZ) of their parent stars. As their expected Doppler signals are too small for a direct measure of their masses, we verify their planetary nature by validating them statistically using the BLENDER technique. BLENDER simulates large numbers of false-positive scenarios and compares the resulting light curves with the Kepler photometry, taking into account additional information from the analysis of Kepler flux centroids and new follow-up observations, including high-resolution optical and NIR spectroscopy, adaptive optics imaging, and speckle imaging. For eleven of the candidates we show that the likelihood they are true planets is far greater than that of a false positive, to a 99.73% confidence level. For the twelfth candidate, the planet confidence level is about 99.2%. Using improved stellar parameters for the host stars, we derive planetary radii ranging from 1.12 to 2.73 R⊕. All twelve objects are confirmed to be in the HZ, and nine are small enough to be rocky. Excluding three of the candidates that have been previously validated by others, our study doubles the number of known potentially rocky planets in the HZ.

We examine high-resolution follow-up imaging data for 84 KOIs with stellar companions detected within 2”. These stars were observed in the optical using speckle interferometry (Gemini/DSSI or WIYN/DSSI) and/or in the near-infrared with adaptive optics imaging (Keck/NIRC2, Palomar/PHARO, or Lick/IRCAL), and all have imaging results in at least two filters. Their companions are all unresolved in the Kepler images, and fall on the same pixel of the Kepler detector; thus the planet radii calculated for planet candidates in these systems are subject to upward revision due to contamination of the target star’s light by the stellar companion. We calculate updated planet radii for these 84 planet candidates, assuming the planet orbits the brighter of the two stars. We also use isochrone models and distance estimates to assess the likelihood that the companion is bound. This analysis complements galaxy models that determine the probability of a chance alignment of a background star for each system (Everett et al., in prep.). Together, these data allow us to isolate a sub-population of Kepler planets and planet candidates that reside in physical binary systems, for comparison to the wider Kepler planet population.

The NASA K2 mission is finding many high-value exoplanets and world-wide follow-up is ensuing. The NASA TESS mission will soon be launched, requiring additional ground-based observations as well. As a part of the NASA-NSFNN-EXPLORE program to enable exoplanet research, our group is building two new speckle interferometry cameras for the Kitt Peak WIYN 3.5-m telescope and the Gemini-N 8-m telescope. Modeled after the successful DSSI visitor instrument that has been used at these telescopes for many years, speckle observations provide the highest resolution images available today from any ground- or space-based single telescope. They are the premier method through which small, rocky exoplanets can be validated. Available for public use in early 2017, WIYNSPKL and GEMSPKL will obtain simultaneous images in two filters with fast EMCCD readout, "speckle" and “wide-field” imaging modes, and user support for proposal writing, observing, and data reduction. We describe the new cameras, their design, and their benefits for exoplanet follow-up, characterization, and validation. Funding for this project comes from the NASA Exoplanet Exploration Program and NASA HQ.

The high-spatial-resolution technique of speckle interferometry has been in use at Lowell Observatory's Discovery Channel Telescope since 2014 with the Dual-channel Stellar Speckle Imager (DSSI; Horch et al. 2009) as a visiting instrument. Using its standard bandpasses of 692 and 880nm, we have used highly efficient DSSI instrument to inspect over a thousand stellar systems over the course of 2014 (Horch et al. 2015). We have also demonstrated the usefulness of the DSSI@DCT system for resolved observations of high-altitude (>1,000 miles) man-made satellites in highly non-sidereal rate orbits.

The Lowell Observatory Discovery Channel Telescope (DCT) has been in full science operation for 2 years (2015 and 2016). Five instruments have been commissioned during that period, and two additional instruments are planned for 2017. These include:+ Large Monolithic Imager (LMI) - a CCD imager (12.6 arcmin FoV)+ DeVeny - a general purpose optical spectrograph (2 arcmin slit length, 10 grating choices)+ NIHTS - a low resolution (R=160) YJHK spectrograph (1.3 arcmin slit)+ DSSI - a two-channel optical speckle imager (5 arcsec FoV)+ IGRINS - a high resolution (45,000) HK spectrograph, on loan from the University of Texas.In the upcoming year, instruments will be delivered from the University of Maryland (RIMAS - a YJHK imager/spectrograph) and from Yale University (EXPRES - a very high resolution stabilized optical echelle for PRV).Each of these instruments will be described, along with their primary science goals.

How many K dwarfs have “kids?” Stellar multiplicity fractions have been obtained for most spectral types, most recently by Raghavan et al. (2010) and Winters et al. (2015), finding rates of 50% for solar-type stars and 27% for M dwarfs, respectively. These findings will be crucial to improving our understanding of solar-system formation, but there has not yet been a statistically significant survey for K dwarfs to bridge the gap between G and M stars. To create a sample for a robust multiplicity survey, an initial set of 1048 K dwarfs was built using the Hipparcos and 2MASS catalogs, the companions of which are called “K-KIDS.” Future releases from Gaia will help us to expand K-KIDS into a volume-complete sample out to 50-pc, and we project that the final sample will contain over 3000 stars, making this the largest volume-complete multiplicity survey ever undertaken. For observational purposes, the targeted K dwarfs are confined equatorially to -30 < DEC < +30 to ensure all stars are observable from either hemisphere. The survey for K-KIDS is split into three companion-separation regimes: small (0.02 - 2.00 arcseconds), medium (2.00 - 10.00 arcseconds), and distant (10.00+ arcseconds). Small separation companions are resolved using the Differential Speckle Survey Instrument, with which we have observed 964 out of 1048 systems to date, already finding 135 new K-KIDS. Medium separation companions are observed via a series of three observations per star at the CTIO 0.9-m telescope, integrating for 3, 30, and 300 seconds to reveal companions of various brightnesses. Finally, a common proper-motion search is used to find companions at distant separations via blinking of digitialized images in the SuperCOSMOS archive, in addition to a large-scale literature survey for previously-discovered multiples. The small and distant surveys are nearing completion, and continued progress on the medium survey ensures that a statistically significant multiplicity rate for K dwarfs will soon be in achieved. Furthermore, a new RV survey is planned using the CHIRON high-resolution spectrograph to find companions that cannot be directly imaged. This effort has been supported by the NSF through grants AST-1412026 and AST-1517413.